276°
Posted 20 hours ago

DEKS OLJE D1 1L

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

The 2-part Polyurethane varnish system consists of 2 products that have to be mixed together. This type of varnish is extremely tough and so also offers very good protection from moisture and UV damage and so potentially a good solution to protect areas that are prone to damage. After stripping and cleaning, allow wood to dry 2-3 good drying days or until it has reached a moisture content of 18% or less before applying finish. Scrub the solution on to the surface and allow it to stand for 10-15 minutes. Then rinse thoroughly.

Interior– Sand wood with 100 grit paper to open the pores, dust off and degrease the surface with methylated spirits. All previous coatings must be completely and thoroughly removed with Dilunett and stripped surfaces neutralised with Net-Trol before applying Deks Olje D1. The short answer is to protect it from being subjected to the elements. Wood is a natural product and so being exposed to moisture, UV rays and pollution will inevitably break it down and damage it. Varnishing your wood will create a barrier against these things as well as give it a beautiful aesthetic and ease of cleaning. Which boat varnish should I use? When no more can be absorbed, wipe up all excess as described in step 3. You are now finished with Deks Olje #1.

14 reviews for Deks Olje D1

Deks Olje D1 must be kept ‘active’, this is done by the ‘wet on wet’ applications and the continual brushing over of the area, which assists and helps achieve maximum penetration. Interior – Sand wood with 100 grit paper to open the pores, dust off and wipe with a cloth soaked in Methylated Spirits to degrease the surface and remove any remaining sanding residue. Deks Olje D1 may soften some caulking. If in doubt consult us. The tannin’s and natural oils in woods such as Iroko impede the penetration and drying of finishes. These species of wood should be thoroughly prepared or allowed to weather for 12 months before applying Deks Olje D1.

Drives out moisture and air by penetrating deep into the wood pores – Protects against the effects of moisture. The secret of Deks Olje’s success lies in its saturation of the wood to bring about an even ‘matte sheen’ finish when dry.

Leave final application 30 minutes, then wipe over the surface to remove excess and puddled material with a rag soaked in Deks Olje D1 and rung out so that it is damp to the touch. Can be applied above and even below the waterline; provides excellent insulation and a basis for adhesion prior to the classical underwater treatment

Allow 3 days for Deks Olje to set up and dry before use, or using in a marine environment or before moving on to the application of Deks Olje D2. All other oils or sealers must be completely and thoroughly removed with Aquanett and stripped surfaces neutralized with Net-Trol, before applying Deks Olje D1. Previously coated surfaces (Paint, Stain, Varnish, Waterproofers) All previous coatings must be completely and thoroughly removed with Dilunett and stripped surfaces neutralised with Net-Trol before applying Deks Olje D1. DEKS OLJE® D.1 may only be applied to bare wood surfaces or a wood surface that was previously finished with DEKS OLJE® D.1. ALL other finishes must be completely and thoroughly removed. After stripping and cleaning, allow the wood to dry for 2-3 good drying days before applying Deks Olje D1. D1 may only be applied to bare wood surfaces or a weathered wood surface that was previously finished with Deks Olje D1. All other finishes must be completely and thoroughly removed first. If necessary sand the surface after cleaning and/or stripping (100 grit paper). New woodExterior – New smooth, planed wood has a hard shiny surface called mill-glaze that prevents maximum penetration and adhesion of any finish, this should be removed to ensure maximum performance of the finish. DO NOT THIN. USE AS IS. The secret of DEKS OLJE® D.1’s success lies in its saturation of the wood to bring about an even ”matt sheen” finish when dry. On boats, D2 can be used for all applications above the water line and below. However, please note that due to the high gloss finish D2 is not suitable for surfaces which will be walked on. This is because it would be very slippery.

Deks Olje #1 will stain metal fittings and fiberglass. Be sure to clean these surfaces before it dries.Begin by applying Deks Olje D1 to an area that can be covered in about 15 minutes. Once the first application has been absorbed, taking about 15 to 30 minutes, begin the next application. Continue to apply coats wet on wet until you have a uniform finish and the overall saturation of the wood is achieved. Linitop Yacht Vernis is specially formulated for use in bad weather as well as any damage caused by saltwater and is also highly flexible. This allows it to move with the wood and so does not peel or flake. Clean all tools and equipment with white spirits while still wet. If allowed to dry, remove with paint stripper. Wipe up any drips or runs immediately with a cloth soaked in white spirits. Dried Deks Olje D1 may be removed with Dilunett. Store and maintain equipment as directed by manufacturer. Once the wood is saturated leave for 30mins and then wipe the surface to remove and excess oil with a rag that has been soaked in Deks Olje D1 and rung out so it’s damp. All other oils or sealers must be completely and thoroughly removed with Aquanett and stripped surfaces neutralised with Net-Trol, before applying Deks Olje D1. Previously coated surfaces (Paint, Stain, Varnish, Waterproofers)

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment