BELTBOX: Vocal Dampener for Singers, Actors, Performers, Stress Relief. A Portable Warm-Up Room! Gift for Singers!

Product Information

Some (larger) boxes contain a (traditional) lightbulb. The lightbulb is there not to warm things up too much, but it will warm up the surrounding air. Warm air rises, and that creates a natural draught. I’m advocating a fan instead, that way you have zero temp increase, and the moisture is drawn out anyway. If you have a heat source there is a risk that the outside of the meat dries faster than the inside. Biltong Box, Top View You can guide and attach the LED strips with the self-adhesive side around the corner profiles for both solutions. The top and bottom profiles can now use the right side profile to align it during placing. After placing a profile, add some pressure to make sure it is firmly attached. Since the wooden dowels will carry our meat for days, we might want to reinforce the dowel holes in the box to carry this weight. This is optional as normally the box should be perfectly capable of carrying the weight of the meat strips, but better safe than sorry.

Place the profile on the miter box and align your measured line with the straight saw guide. Now start sawing holding your profile firmly in place until you are through. Let’s now drill the fan hole using our 89 mm or 3.5” hole saw; the size is, of course, chosen by the dimension of your fan. While it does limit your movements and can cause tension, it is still not the end of the world in some instances, and you can still sing comfortably enough. Does Not Have Different SizingIn some dry climates- indeed, like the highveld area of South Africa the Voortrekkers credited with inventing biltong were crossing- there would be no risk of this moisture gathering at all because the ambient moisture in the air is that low. Our LED strip has a little control unit that can be operated via Wifi. We will glue it to the outside of our box.

Everyone lives in different climatic conditions, and these can have an effect on the biltong making process. To make a great piece of biltong, three factors count: Related Post: Facts About Singing - 15 Fun, Crazy, And Unbelievable Truths Other Ways To Dampen Your Sound Continue to do the same with the other sides, keeping in mind that the right side profile needs two sides miter sawed. And the left side profiles none. Take the drill and align it on the first dowel point; drill slowly, as you don’t want to drill through the panel! Then, do the same for the other 3 indicated points. Here you can see the lengths we need for the corner profiles; we will miter saw them to fit them nicely.Now it’s time to measure our wooden dowels; we need four dowels 34 cm or 13.38 inches long. We bought one long dowel with a diameter of 9mm or 0.35 inches. Let’s measure our first dowel and mark 34 cm or 13.38 inches on the dowel. On the indicated spot, we will see our first dowel to size. The BELTBOX really does lessen the amount of sound that is coming out and possibly bothering others. This is the product's main function, and it delivers as promised, dampening the sound up to 30db. But it’s not just about the equipment – we also offer a range of delicious biltong spices that are sure to take your biltong to the next level. Made from only the finest ingredients, our pre-made spice blends make it easy to create the perfect flavor and aroma in your biltong.

To attach the hinges, use the included plastic measure tool. Place it firmly against the top panel, with the holes facing down on the left panel. Push it forward as far as possible on the left panel.Now that we know which components we’ll use, let’s look at the tools we need to create our biltong box. We need a drill and hole saws to make the ventilation and fan holes. Are you looking for a way to dampen the sound of your loud singing as you practice? Or are you looking for something to scream in when you've had a long day? The BELTBOX is a product that was made just for people like you and me. Once your drill is aligned correctly, you can start drilling but make sure you put the hole saw level with the panel, and don’t drill too fast to ensure the panel doesn’t get too hot from the friction caused by the drilling.

Also, we’ll use a wooden corner profile to close the gap between the glass door and the cabinet. Finally, we can use washers to reinforce the attachment of the wooden dowels. The only thing is, it's the only product of its kind that is out right now, which comes with pros and cons. I love the idea of the product and hope to see other releases that build on what it currently offers. is about as loud as the sound of a whisper, so deducting a whisper amount from a very loud belt will not stop you from being heard. It's more like the difference between a loud and semi-loud voice. So, the bulk of your biltong dehydrator can be as simple as a cheap pine cabinet you have adapted. All that matters is that the airflow is good. Yet you cannot simply drill big holes and leave it at that- those big holes will allow flies, other pests, and bacteria to land on your meat. Make sure you see the measured and indicated spot from the previous step. Now we’ll take our drill, with the hole saw attached, and align the drill point with the measured spot on the panel.As to be expected with a face mask, it can be hard to breathe in this thing. It will be an adjustment process that some people can make it through, while others will want to give up and write the product off as a waste. We measure from the panel’s front side and mark the first point at 9.5 cm or 3.74 inches. The second one is at 17.5 cm or 6.89 inches, and the third point is at 25.5cm or 10.04 inches.