Liberon Decking Oil 5 Litre - Clear

Product Information

Apply the stripper to the first section using long, even strokes. Do not walk on a section that has stripper on it. With your gloves on, shake the solution, pour it out into a suitable container, then stir it up using a paint brush. Allow to penetrate for 15 to 30 minutes, then apply the second coat without waiting for the first to dry

It is vital when using stripper or bleacher to neutralise the wood thoroughly before applying any finishing products. We recommend Wax & Polish Remover to neutralise stripper and bleacher. Allow to dry for at least 24 hours before commencing the wax, oil or varnish process. When using water-based varnishes wood bleacher must be rinsed thoroughly to remove all residues. You can expect a slightly darker look for the first few days so don’t panic whilst it’s drying – it’ll eventually come up much clearer and shinier.One thing you’ll notice is the busier areas will fade first, sorry for pointing out the obvious but it was more in relation to the manufacturer comments with regards to UV filters – you have no worry at all about this product failing through sunlight, the wear and tear is the only issue with oils. Wood has naturally occurring oils which seep out – as will this oil, or any other you choose from the review for that matter. Pros: Once you’re finished, leave the oil to dry out completely for around 24 hours, then repeat the process as necessary (two or three coats are generally required for the best results). the type of wood being applied to: Hard woods (such as cedar) will give a lighter shade with the same oil than a soft wood (such as pine). The more the oil can saturate the wood grain, the darker the appearance of the finish. It is most likely that the timber was not fully dry when the woodstain was applied. It is vital that timber is completely dry before applying any finishing products. Beware that there may not have been any rain for a few days but there may have been a heavy dew overnight making the timber damp.

The last piece of good news is the different colours – follow this link and you’ll be able to find the colour you’re looking for, be it lighter or darker. However, don’t trust in the picture on the product, still give yourself a chance of maintaining sanity and do a test patch 😀 When you look at the finish you can’t help but feel this is going to be sub standard, however when you really get into this product you realise it’s the real deal. The anti sip formula really is anti slip, you’ll notice the difference day one when its wet, just how much more effective this is. The clear satin look is lovely too. You’ll definitely want that test patch though to make sure its the finish you’re looking for. Apart from that you can expect a decent bit of protection from dirt and grime too. It’s formula will give a decent wearing finish. It’s designed to penetrate deep into the wood to replace the natural oils lost over time through weathering, and to offer deep-seated protection against splitting and drying, while the tinted oil brings out the colour in greyed wood for a fresh look. Stir the oil up, pour it out into a suitable container, and apply it to raised features such as railings using your paint brush – use long, even strokes as if you were painting a wall. As with any kind of refinish, wait until there are several days of clear weather forecasted with low chance of rain throughout.

Latest articles

Our courier will return the parcel to their depot and try to deliver it on the next available working day.