eco-filtration 50MM THREADED TANK CONNECTOR KOI FISH PUMP FILTER PIPE FITTING

Product Information

This item is 100% compatible with other DIN specification metric solvent weld PVC pressure pipe parts and BSP (British Standard Pipe) PVC threaded parts.

A pressure pipe fitting that provides excellent chemical resistance to most solutions of acids, alkalis and salts and solvents that can be mixed with water.These Bulkheads - Tank Connectors are sized so the correct pipe fits 'inside' of the fitting and is clamped with the gland. PVC fittings are manufactured in accordance with the following standards – WRAS, BS-EN1452, BS4346-1, ISO9001 and ISO14001.

Pond plants are sent directly from our supplier to make sure the plants you receive are fresh and in great condition. The Threaded Tank Connector has been designed like a socket/joining bush, allowing for a rigid pipe to be solvent welded on either side of the connector.

The flange tank connector has been designed like a socket/joining bush, allowing for the ridged pipe to be solvent welded on either side of the connector. The other end allows the pipe inside or you can connect a fitting to the outside, which should be glued with Solvent Weld Glue . These Elbows/Bends are great for joining two sections of pipe at a 45 Degree angle with limited friction loss. Flange tank connectors are quick and easy to use, making them perfect for any job, great for inlet/outlet ports between chambers.

Suitable for both indoor and outdoor applications and common place on hot tubs, whirlpool baths, spas and swimming pools.Building your pond and is only a cost saving exercise and the added security and peace of mind that Pressure Pipe brings is well worth the extra cost. First, you should tidy up the cut you’ve made on the MDPE pipe – and it’s a good idea to chamfer the end if you’re working with a pipe over 40mm in diameter. Jointing process - Solvent cement spigot end x BSP thread (with use of thread sealant such as PTFE tape). The flange tank connector is supplied with self-tapping stainless steel screw, the self-tapping screw can be used with tank/liner thickness of up to 5mm.

We take fraud very seriously so all credit and debit card transactions are subject to validation, authorisation and security checks by both the card issuer and ourselves. Black Waste 90 Degree Bends should be used in conjunction with Black Waste Solvent Weld PVC pipework.Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. The part is made up for 4 distinct sections – the overall threaded body with the compression fitting, 2 rubber washers, and a nut that sits on the ‘wet’ side (inside) of the tank. The Pvc Metric Pressure Pipe Tank Connector / Bulk Head must be intact, and in complete resalable condition. However, this excludes damages caused by accidents, neglect or misuse of the Pvc Metric Pressure Pipe Tank Connector / Bulk Head.