Waxoyl High Pressure Sprayer Kit with Extension Hose and Spray Nozzle for Car Wax Spray and Car Polish. Car Care Kit by Hammerite for Waxoyl, Perfect for Car Shampoo and Wax

Product Information

Waxoyl and Ziebart both definatly work. My MK2 Granada had waxoyl done from new and its survived very well in places it should have rotted away. The sills, chassis, doors etc are all still in good solid original condition after nearly 30 years and 200K miles! The car has needed extensive welding but only in places the original Ford coatings have failed! Its certainly done the job as im sure the car wouldnt be around today had it not been treated. It can be a pain though when welding as it melts in the heat and catches fire easily! some air in at 50psi, you should get a nice circular spary of waxoyl out of the nozzle, increase pressure and if you are getting a real lopsided spray pattern take the nozzle apart and

Remote areas/Scottish Highlands and non-UK Mainland areas may be subject to additional charges and a longer delivery time. This is determined by our couriers not Rustbuster. More recently, I've used motor oil, thinned with diesel or kerosene to the point where it can be sprayed with one of those cheapo trigger-action hand sprayers, though a proper cavity sprayer would probably be better. hour later cat was scrubbed and very peed off with me, I’ve had 2 baths, and also cleaned the bath it seems that the bath will not be rusty...scrubbed kitchen floor, sink, worktop It sat there and looked at me the way only a cat can... it sniffed (unapprovingly) the dripped waxoil, and I said…Like anything else, you have to prepare properly and apply it properly. It's no good just slapping it on crusty surface rust as that'll just fall off. Do some prep work first, take the "clumps" off and cover the rust hiding underneath those big clumps. There are also different kinds of treatments. Plain old Waxoyl is water resistant but will wash off over the space of 4-6 months, sooner if you make a habit of driving through a lot of standing water. There's also Underbody Seal with Waxoyl added. Before I waxoyled inside the chassis members I set the compressor to maximum and sprayed out any dust and crap. It was all quite clean in here, otherwise I would have had to power wash it and wait weeks for it to dry.

Long term, it forms a semi-solid skin of wax (demi-semi-solid in average Scottish temperatures) under which rust continues. This gun has a screw thread that is designed to fit onto many popular undersealing products – except, for some reason, Waxoyl. I emptied out a tetrashutz tin and used that. If you really want to protect and get Waxoyl to do what it's supposed to do, then (as I do with all of my cars) pay for a professional steam clean of the underside and professional Underbody Seal with a pressurised delivery system. Then Waxoyl on top of that yourself with a tin of Waxoyl and a manual hand sprayer every year. During summer is best, then it's protected for winter.

Features:

I decided to use a Waxoil gun and my compressor, I had the propane burner on in the workshop since 3.00pm flat out and it was like the sahara, in fact it was so hot I decided a T-shirt and shorts was the dress code.

This did not improve the sink/kitchen area one little jot, .....ever tried holding a 'waxoiled cat' in a sink with water and rags, and especially when cat does not enjoy it ?Grabbing some white spirit to further thin the waxoil I entered the kitchen and unscrewed the waxoil lid.