Apollo Ultrasonic Füllstands-Sensor Standard Standard Betriebsspannung (Bereich): 150-250 V/AC 1S

Product Information

Hot Water Cylinder Accessories Immersion Heaters and Controls Kingspan Ultrasteel Hot Water Cylinders Flomaster Hot Water Cylinders Q4. I had my first delivery of oil to my new oil tank and the litres delivered do not match that shown on my monitor? Tank mounted ultrasonic transmitter unit, compatible with the standard 32mm port fitted to modern plastic oil storage tanks. Bunded Oil Tanks Domestic Oil Tanks Titan Oil Tanks Cemo Uni-Tank Carbery Oil Tanks Harlequin Oil Tanks Atlas Oil Tanks Fuel Dispensing Tanks Fuel Masters Portable Fuel Dispensing Tanks Carbery Fuel Points More Fuel Dispensing Tanks

You may place the transmitter up to 200 metres from the receiver, line of sight. Please keep in mind that obstacles such as walls, re-enforced walls, metal objects or metal buildings reduce that distance.Using a cross point screwdriver, undo the four screws located under the main body of the transmitter The Watchman Sonic is the base level telemetrysystem we offer. This system works with a transmitter that will sitonto the top of your tank and will communicate with a 3 pin reciever plug inside your property to give you a ‘out of 10’ bar reading.

Apollo Ultrasonic Oil Tank Level Monitor/Gauge is suitable for almost any tank up to 3 metres tall. Easy to fit, the Apollo Ultrasonic can be installed in minutes. Monitor Features: Wastewater Accessories Sewage Treatment Plant Accessories Septic Tank Accessories Pumping Station Accessories Separator Accessories / Spares Wastewater Distribution Boxes & Drainage Wastewater Effluent Filters More Wastewater Accessories Apollo Ultrasonic Smart Monitors advanced processing capability doesn’t just calculate the level of fuel inside a tank, but instead analyses the volume of fuel remaining. This succinct, yet significant difference allows the system to be configured for different shapes and models of tanks.

APOLLO SMART OIL MONITOR / GAUGE

images] => {"image_intro":"images\/Ollie_Meters_And_Gauges.png","float_intro":"","image_intro_alt":"","image_intro_caption":"","image_fulltext":"","float_fulltext":"","image_fulltext_alt":"","image_fulltext_caption":""} One size fits all. The Apollo Ultrasonic is suitable for almost any tank up to 3 metres tall, irrespective of manufacturer, capacity or material of construction. The transmitter monitors the level of heating oil remaining inside a home heating oil tank, together with fuel usage and consumption.

If there any objects or debris in the way of the beam then this error may occur also after a tank fill if the oil is within 6″ of the gauge If the monitor has lost power the previous day or the transmitter has been unable to send a signal the unit will update every hour until the following day You may place the transmitter up to 200 metres away from the receiver, line of sight. Please keep in mind that obstacles such as walls, re-enforced walls, granite walls, metal objects or metal buildings reduce that distance. If your tank is inside a shed or building separate from the receiver device, it may cause issues. The reason for the foregoing is that the Ultrasonics bounces a sound from the surface of the oil/liquid and measures the time it takes to then give a reading but if the oil/liquid is too close then it cannot record a time, it, therefore, needs a distance of 100 – 120 mm to give a correct reading. If the gauge inside your tank has failed or needs replacing, don't worry — it is possible to replace it if you are careful. To replace a float gauge, you will need a replacement gauge, oil lubricant, a wrench, wire and a torch. Use lubricant on the tank cap to loosen it, before turning it carefully with a wrench. Be careful not to ruin the threads. Find the end of the old float gauge arm and pull it from the oil tank with a piece of wire. You may need a torch to see what you’re doing. Remove the gauge from the gauge pipe and place the new gauge inside. Re-insert the gauge and gauge pipe into the oil tank and close the lid.

Product Specification

NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives Q10. What do the Error readings mean, and how do I rectify the issue? Q11. What kind of battery is used in the transmitter? Tanks should only be filled to 95% of their brimful capacity. In the event that the tank is filled to the top, this will not harm the transmitter as it is a sealed unit. If the tank is filled to the top as described then the oil/liquid will be too close to the underside of the transmitter and will result in incorrect readings or a flashing triangle error on the receiver device. When the oil/liquid level drops to 100 – 120 mm from the top of the tank, the readings will return to normal without any adjustments or action needed.