Tile Doctor Pro-Clean - Professional Tile and Grout Cleaner - 1 litre

Product Information

The best sealer stripper and cleaner for the job is a product called Tile Doctor Remove and Go so I mopped a strong dilution onto the floor and then left it to soak in for around fifteen minutes. To get the best from this product it’s advised to give it a long dwell time thereby allowing it to break down old sealer and dissolve the dirt and contaminants. For the aftercare of unpolished Limestone, I recommend Tile Doctor Neutral Cleaner which is designed for the cleaning of sealed Tile and Stone. If using a different product always read the label first as many cleaners are too strong for use on sealed surfaces and will strip off the sealer over time. This gives the floor a good mechanical scrub and works wonders releasing the ground-in dirt and soil from the tiles. The strong dilution of Pro-Clean will also remove any remaining sealers from the tile, however after sixteen years I doubted there would much trace of sealer left. Once done the floor was rinsed with water and all the soils removed with a wet vacuum. I arrived in the morning and began work by inspecting the floor and taking a few moisture readings to ensure it has completely dry. I was happy with how clean the Grout looked and how well the Marble had responded to the burnishing process. The floor had that smart, eye-catching polished appearance and just needed sealing to protect it from dirt becoming ingrained into the pores of the stone.

To remove the broken tile, I stated by cutting though the grout lines separating it from its neighbours and then carefully breaking the tile up for with a hammer action drill fitted with a chisel bit. The bits of old tile were removed and what was left of the grout was removed using a small Grout-Out tool. Whilst at the property and discussing the Patio with the owner I carried out a couple of tests using various products. The testing went well, and my customer could immediately see the potential of the Patio and how the problems could be rectified. The process I had worked out would involve treating the damaged white areas using a series of Tile Doctor Diamond pads to polish out the damage and then restore the colour and protect the Limestone with Tile Doctor X-Tra seal which is an ideal sealer for external stone. Happy to accept our quote a suitable weather window was chosen, and the date was set for the work to be done. Renovating an Acid Damaged Limestone Patio With the floor dry my work was done and you could see it looked so much lighter and cleaner and will now be a simple case of mopping. My client was incredibly happy with the result and relieved the floor looked clean as it should have been following installation and happy that the there would be no need to scrub it vigorously going forward to keep it clean. Leave to dry overnight and then finish with a No. 4 Green Burnishing pad until a nice light sheen has been achieved, this will tighten up the pores of the Travertine thus making it easier to seal and maintain. See below for sealing instructions. Sealing Travertine TilesFor aftercare cleaning I like to recommend the use of Tile Doctor Neutral Tile Cleaner. This is a gentle neutral pH cleaner that can be used frequently. It has a nice fresh fragrance, and as its concentrated a small amount goes a long way. It will also help to protect the newly applied sealant. This is important and most supermarket floor cleaning products are simply too strong for use on a sealed floor and can prematurely degrade the sealer. All of the resulting cleaning chemicals and soiled residue were then flushed and vacuumed away with our pressure rinsing system. This method leaves the Terracotta tiles completely fresh and clean, ready to receive a new sealer. Sealing a Terracotta Tiled a Floor If you require advice on how to clean your old stone floor and tile grout to make it look like new and then how best to reseal it so it keeps looking new you have come to the right place. There was also a damaged tile that needed replacing which I was happy to do. We often get asked to replace tiles but we don’t really take on tiling work unless it’s part of a bigger renovation project.

As you can see from the pictures, the deep clean and fresh sealer has brought out the best in the floor and given it a new lease of life. The sealer should last for a good few years and there is very little evidence of the damage done previously. Needless to say, the client was very happy and much relieved. This type of clay is not made to a great standard and thus the porosity levels between each tile can vary greatly, this makes them hard to clean, hard to seal and generally harder to maintain. UK Tile Doctors have been trained to cope with these issues however it should be noted even with the right equipment, products and experience no guarantee can be made on a satisfactory outcome of what we at Tile Doctor and a customer would call a great finish given the low quality of this product. After treatement the solution should be rinsed off with water and removed with a wet vacuum. The floor should then be left to fully dry before applying a sealer. Sealing Terracotta Tiles Travertine tile is a natural stone material that has unique features and colouring that no other stone can offer. The distinctive design and natural patterns found within Travertine make it very popular as a flooring material and is often used as bathroom wall tiles and table tops. Travertine's durability makes it ideal for commercial and residential installations and it is often used externally. Floor Tile CleaningAfter sufficient scrubbing, we were satisfied that all of the soil was broken up, we then machine flushed and vacuumed the cleaning product and dirt away from the floor. As these tiles are factory sealed there is no need to apply a sealant. This customer in Crediton originally enquired about grout cleaning for their Kitchen floor, however after speaking to them on the phone I discovered their tiles where Marble and so I suggested they may be interested in our stone polishing service as well. After closer inspection, it was apparent that whoever had laid the tiles had not cleaned the grout away from the tiles well enough and had left a fine layer of grout haze (aka Grout Smears) across the floor. This explained it was difficult to clean the tiles as the grout was trapping the dirt making it extremely hard to achieve a clean smooth look. It was a shame as the kitchen looked fantastic, but the floor was letting it down. After the 1500-grit pad I put several floor fans in place to accelerate the drying of the Marble floor before applying the last pad in the burnishing system which is a very fine 3000-grit polishing pad which adds lovely shine to the Marble and is applied dry with only a little water sprayed onto the tile. The tile had been laid through out the Kitchen and adjacent dinning area and the solution was quite straight forward and simply required and a good clean and re-seal as detailed below. Cleaning Limestone Tiles