276°
Posted 20 hours ago

Corsair iCUE 5000X RGB Tempered Glass Mid-Tower ATX Smart Case (Four Tempered Glass Panels, Corsair RapidRoute Cable Management System, Three Included 120mm RGB Fans, Smart RGB Lighting) Black

£109.995£219.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Any good PC case should have an attractive design that doesn't interfere with the building process or proper airflow. By that definition, the Corsair iCUE 5000X RGB is a success. It's a case for enthusiasts for sure and one with plenty of opportunities to realize an intricate custom build. It might not have quite as good of airflow as the Corsair 5000D Airflow (I mean, it's right in the name), but anyone who wants to go all-in with tempered glass should find that it's suited to their needs. And that's not to say the 5000X is stuffy — it was able to move air through without trouble, keeping temperatures right where they should be. However, I wasn’t happy with this result. It’s a disappointing improvement especially considering the increase in noise levels, so I removed the shroud on the inside. This helped reduce noise by another dB and added more airflow, dropping the temperatures a further 2 degrees – and it’s this configuration that makes most sense. Yes, I'm aware. I never said not to do that, just that it would have been helpful to see the thermals of the case with max cooling in addition to the review in its present state. The info provided is very important but, because of the focus taken in the review, the full thermal potential of the case is not shown. I have fans from my previous build and I would imagine many other people do too, so it's not like it is guaranteed that adding extra fans would cost money. I don't really see this as a reason not to also present the results with more fans - other than encouraging the manufacturers to shoot for better thermals out of the box Series – The 7000 Series expands the cable management and performance concepts to a full-tower providing all the fan/cooler mounting and internal space you need to build your next masterpiece! The spacious interior of all three cases offers great cooling potential, with room for up to 10x 120mm or 4x 140mm cooling fans. A specialized motherboard tray with customizable fan mounts enables you to install an additional 360mm radiator into the side of a 5000 Series case to bolster your cooling. With room for up to 4x 2.5in SSDs and 2x 3.5in HDDs, along with a host of front panel I/O connections including a USB 3.1 Type-C port and 2x USB 3.0 ports, the 5000 Series has all of your needs covered.

If you’re looking for a comprehensive comparison between the two series, we’ve put together this table: Case Series Overall, no matter where you stand or where this may sit within your setup, the 5000X and 5000D look amazing. These are high-quality cases. The Inside

Our 4000 Series and the most recently launched 5000 Series cases have arrived! Both lineups signal a return to classic CORSAIR styling with a focus on improving the build experience, flexibility, and performance over our previous lineup of cases. CORSAIR iCUE 4000X RGB Of course, how valid are these standardized tests really without taking into account the side panel, and its added intake? We added three fans ML120 here, ran them at about the same speed as the intake case fans, and observed the changes.

https://corsair.sharepoint.com/:f:/s/MarketingCommunications/EjyC9Z3Nf-tPgv-SyxjHEl4BsOZzM1SvoRUMYadnis7kKg?e=P9EaXW As both the Corsair iCUE 5000X and 5000D Airflow are very similar, I’ll be reviewing them together, sharing any differences, before finally concluding with which you should buy for your next PC build.

The Corsair iCue 5000x in review

It’s now time to get to one of the most impressive aspects of this case. That thing I went on about in the first paragraph. The Corsair iCue 5000x hits its stride where many tempered glass cases fall short, because it manages to blend sleek looks with function. Corsair uses angles to channel the air around the glass front panel and to the fans, with the same design providing heat removal via the roof vent. Usually, intakes are far too restricted to provide the necessary volumes of air needed to cool components properly. I thought that would be the case for the front and top panels, but I actually didn’t see any temperature differences when testing my system under full load with the panels off. Corsair clearly spent a lot of time testing the spacing here to get almost identical results to the Airflow D version of this case. With everything put together and the glass side panels reinstalled, the case looks stunning. It's tinted just enough to show off only what really matters. I ran the PC under load for about 30 minutes with an outside ambient temperature of about 21 degrees Celsius to see how cool it runs. Keep in mind I added a rear exhaust fan (which you should definitely do as well no matter what) and two top exhaust fans. Temperatures inside the case hit 30 degrees Celsius at the motherboard while the system sat idle. The CPU hovered around 35 degrees Celsius while idling. Despite adding a bunch of noise (46.8 dB total system noise) the side intake did help reduce the CPU temperature by 2 degrees Celsius and the GPU temperature by about 4 degrees C. For the old case, we found that the CPU idled at 32 C while the GPU was at 27 C. Under load, we observed the CPU move between 52-72 degrees on average with a maximum temperature of 81 C. The GPU performed between 47-55 C. All of the same components were then transferred over to the Corsair case in the same positioning. The CPU still idled at 32 C, but the GPU was down to 23 C. Under load, we observed the CPU move between 52-66 degrees on average with a maximum temperature of 75 C. The GPU performed much better as well, shifting to a stable 40-41 C.

This new case lineup is our best yet and we can’t wait to see what builds you’ll make with them! For those still deciding which case to go with, here are some final notes that may help: As mentioned, I took advantage of the open side radiator mount and vertical cable shroud to run some of the bulkier cables down to the PSU. If you're working with a build with a side radiator (which requires you to remove the vertical shroud), you will have to spend some extra time on getting everything laid out properly. One other thing to note is that the powder coat on some of the steel parts is rather delicate. I scratched a couple of areas with what I don't think was excessive force. When building, take care to keep your finish intact. Corsair cases are never shy of great features but I’ve never been quite as impressed as I am with the 5000X and 5000D. I have no doubt that the 5000-series is going to be a game-changer and fully restore a bit of credibility to the Corsair name, making PC builders once again turn to them when it comes to building a new PC. Cable Bar Beyond the series number, the letter at the end of the name helps to denote the feature set a case is equipped with. For example, an “X” case focuses more on showcasing your components and comes equipped with additional tempered glass panels (two on 4000X, four on 5000X, and three on 7000X cases) when compared to a “D” case which feature solid/perforated steel front panels with a focus more on minimalism or performance (as seen on AIRFLOW versions) while retaining a large tempered glass side panel. Keeping Your Build Cool CORSAIR SP RGB Elite AirGuide FansBehind the glass is a steel swing door — completely and easily removable for better building — that hides cabling, SSDs, HDDs, PSU, lighting nodes, and anything else housed behind the motherboard panel. With the panel closed and the glass in place, you'd never know there's anything there. Some might remove the swing door completely if they're particularly proud of their cabling, but others (including myself) will appreciate the relative mess it hides. The CORSAIR 7000 Series of full-tower cases is our latest addition to our new case lineup that started with the CORSAIR 4000 Series last year and 5000 Series earlier this year. Today we’ll take a look at the core features that these cases share as well as what makes them unique to help you decide which chassis is the right one for your next build! The Details Adding fans can almost double the price of this case if you fill all slots with matching RGB fans to get good cooling results.

The top of the 5000X and 5000D follows on from the front of both cases, with angular vents on either side of the glass or mesh panel. Again both look great but the glass top on the 5000X is absolutely superb and while the airflow may suffer in comparison, Corsair’s ventilation design provides everything with enough air to stop those components from cooking. The part that causes the most trouble is the cable shroud that sits on the front right side of the motherboard covering the rubber grommets; presumably to minimize how much cable is shown. Not only that, but the screws and screw holes for it seemed somewhat worn after just one build in this case, which is worrying when you consider future builds outside of the first one. It doesn’t help that these covers feel a bit flimsy and bendable, so keep it in mind to have a gentle hand when removing and reattaching them. Debuting in the recently launched 4000 Series, the CORSAIR RapidRoute cable management system has proven to be a hit with PC builders looking to minimize the hassle of cable routing while still achieving a clean, professional look for their system. The 5000 Series takes RapidRoute even further, with a concealed cutout, wide enough to fit all major connectors to your motherboard, and multiple removable routing channels through which you can run all your cables out of sight. With a generous 25mm of cable routing depth behind the motherboard, and a magnetic door behind which to hide your cabling, it’s exceptionally easy to build a top-tier PC that also looks the part. With the full range of features available in all three cases, the only choice is which style you prefer. The 5000D is equipped with a minimalist solid steel front panel, complete with dedicated ventilation channels for air intake. The 5000D AIRFLOW’s steel front panel is perforated with triangular cutouts for maximum airflow to your components. The 5000X RGB makes for a breathtaking build encased in four tempered glass panels, perfect for displaying the vibrant RGB lighting from the included SP RGB ELITE fans and all your RGB components. Whichever case from the 5000 Series you choose, one thing is clear: you’ll have an immaculate build that keeps its cool.https://corsair.sharepoint.com/:f:/s/MarketingCommunications/EjjDIBNsWa1Boos5oo4X_6IBn-ryDxcRXTrrMd8vicVpFA?e=52QFTv CORSAIR also includes subsidiary brands Elgato, which provides premium studio equipment and accessories for content creators, SCUF Gaming, which builds custom-designed controllers for competitive gamers, and ORIGIN PC, a builder of custom gaming and workstation desktop PCs and laptops. Series – The 4000 Series is a great start to a new build, fitting the standard mid-tower look while providing a lot of features that make it easy to build in and provide excellent cooling to your components.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment