Knightsbridge SF4200BC Screwless 10 A 6-Gang 2 Way Switch, Brushed Chrome

Product Information

This is because if you only need a 1 way switch you can still use it by only connecting one of the terminals (L1 or L2) and common terminal. If the switch doesn’t work the way you want it to, you can either turn the switch around or swap the L1 and L2 terminal. Plate Switches and Ceiling Switches

When working on or around the electrics you are allowed to do yourself at home such as changing switch faceplates it’s essential that you know exactly what type of light switch does what so that, when changing them, you change like-for-like. On the whole 2 or 3 gang switches will always be 2 way switches. If you are buying switches and don’t know exactly what you need then it is often a good idea to get a 2 way switch anyway. It is very important to be safe. Please have a look at our project on electrical safety before you begin any project. What is a 1 or a 2 gang light switch? In this project we have been talking about plate switches which are the most common types of light switch that are used in peoples homes.The rules on what you can and cannot do to the electrics in your home are extremely strict, however when it comes to changing light switch faceplates and a few others, you are allowed to do this without the assistance of a qualified electrician.

With this in mind, this DIY project looks at the different types of light switch and what each should be used for. Rules and Regulations for Electrical Work Don’t take any chances; if you don’t understand the job from start to finish then don’t attempt it, it’s that simple! If you are wanting to add new lights and light switches to an existing circuit or the similar then this is not possible, this will need to be done by a registered Part P electrician.Intermediate Switches: If you need to control the lights from three places, say you have 3 entrances to a large room and need a light switch next to each one, you will need an intermediate switch. The light(s) can be switched on and off from anyone of 3 places A 1 gang switch will control a single lighting circuit, or turn 1 light on and off, with a 2 gang switch you can control two individual lighting circuits, and so on. A ceiling switch is mounted to the roof and is switched on and off using a pull cord – see our project on how to fit a pull cord switch. This prevents any water or moisture coming anywhere near any electrical source. When working on or around electricity, make sure that the power is off and the circuit that you are working has been isolated. If you have any doubts at any time then you should consult a professional. This is because he/she will have all of the necessary skills and knowledge to test the circuit and then issue a minor works certificate covering the work that’s been done. Failure to do this can invalidate your home insurance!