Joined in 2023 
82 
63 About this deal
Don’t be surprised if Elmer’s isn’t a miracle solution for you when you’re using non-PLA filaments, printing something with delicate parts, etc. In these situations, I recommend opting for a more specialized 3D printer glue, such as the one below. Best Glue Overall: Layerneer Bed Weld Keep a close eye on the initial layers of the print. Make sure that the layers of the object are adhering properly to the glue layer. If you notice any issues, such as corners lifting or warping, you may need to adjust your print settings or tweak the glue application for better results.
Magigoo is technically re-wettable, just like Layerneer Bed Weld, it just isn’t advertised as such. If you fill a spray bottle with water, give it a couple of spritzes, and swirl it around a bit, you can use one application for multiple prints. To use liquid glue, first dilute it 1 to 1 with water in a cup or bowl. Then use a wide (cheap!) paint brush to apply an even coat of glue to your bed surface. Wait for it to dry before printing. Can I use Gorilla Glue or Super Glue on my 3D printer? Remove the object: Once the print is finished, wait for it to cool down completely, then remove with a spatula. If you only get problems every once in a while and would rather spend your limited hobby budget on new filaments or cooler upgrades, it’s understandable to prioritize saving money. Tragically, Elmer’s doesn’t work for every situation. There’s a complicated range of different factors that go into whether or not you’re getting good first layer adhesion, including the type of filament, your print bed material, the print in question, and your settings.
Games
Firstly, Gloop! sells chemical adhesive that works for one type of filament, and their lineup includes only three different types: PLA, PET, and ABS. That might be okay depending on what you like to print with, or it might be a complete dealbreaker. So, considering the reliability and filament compatibility you’re getting, Magigoo is a solid secondary option to Layerneer Bed Weld – especially if TPU is giving you the most trouble. There’s little to be disappointed in (the applicator, mainly), and lots to love. Best Multi-Purpose Glue: 3D Gloop! Another user stated that if you are using a glass bed, then you might find better results by using ScotchBlue Original Multi-Surface Painter’s Tape on top of it, as the user found great success with it. Overall, Layerneer Bed Weld has superb adhesion and makes things easy to pop off the print bed as soon as it cools. In other words, it works for both types of adhesion issues: over adhesion and under-adhesion. I rate it as the best on the market for all these reasons.
This means that you’ll typically have glue on your paper craft that won’t be covered up by another piece of paper. When this happens, you want to make sure you have glue that dries clear.Another user who owned a PEI plate stated that he preferred to put a layer of glue before each print he would make. Eventually, he changed his build plate and now he doesn’t use any more glue. If you ever create multi-part 3D prints, Gloop! can fuse them seamlessly. If you regularly feel annoyed with layer lines but don’t want to shell out hundreds for a resin printer, Gloop! can help with that, too. For more on this, we also have an article on the best glues for 3D prints. Elmer’s glue is easy to apply – even a 5-year-old can do it – and is a very functional adhesive for using with typical 3D printer filaments like PLA, PETG, and ABS.
Painter’s tape is even worse. It only works consistently on lower bed temperatures and is slightly harder to source than the other two. It’s the type of adhesive you should use in a pinch – not your go-to solution.Yes you can! The key is using PVA —PolyVinyl Acetate — which is used to make white glue, wood glue, carpenter’s glue and yes…school glue like Elmer’s. PVA is a type of rubbery synthetic polymer that can be dissolved with water. It’s also used in dissolvable support filament!
Great Deal 
New Comment