Abwan Integrated Circuit, Coolrunner Rev C for Jasper Trinity Corona Phat & Slim Cable Xbox360 Pulse IC

Product Information

Open J-Runner and select ... next to the Load Source field and select your nanddump1.bin or nanddump2.bin if not already selected. In the upper right corner of the window, select the dashboard version you chose for the patched dump that you wrote to the motherboard and make sure that the Glitch2 radio button is selected. Turn on your console. It will boot into XeLL and begin flashing your NAND. Once it has finished, it will power off your console. Coolrunner Rev C - http://www.xconsoles.com/products/cr-rev-c-mega-bundle-1.html or http://www.modchipcentral.com/store/product.php?productid=17959 Highly Recommended: A case opening tool like this (you don't need it but if you have extra cash it helps) Can use DemoN to do a dual NAND setup (about an extra 50-60 dollars) (DOESN'T WORK ON CORONA V2's/V4's)

Protecting yourself from accidental updates (prevents e-fuses from blowing). Phat: http://team-xecuter.com/forums/showthread.php?t=53292 Slim: Remove R6T3 (can't find picture). Also if you have a Jasper you need to determine what its internal memory is. If you have no internal memory unit (as in when you go to memory there is no MU with no hard drive or external MU plugged in) then you have a normal Jasper. But if you have a MU that is close to 256MBs when empty then you have a Jasper BB 256MB, and if your MU is close to 512MBs when empty than you have a Jasper BB 512MB. If your CB is on this list it is patched and not JTAG'able. If it is not on this list you are good to go. Fan(s) are in place and plugged in (On a phat console, the fans can be angled on top of the heatsinks to cool them for testing) LibXenon (runs in xell) based apps/emulators: http://libxenon.org/index.php?PHPSESSID=ja3u7k1skvj561qjg9t2ifsst5&board=8.0What do I need to have connected to my Xbox 360 while trying to glitch it? Is it just the power cable, A/V cable, front panel board (power button), and fans? Or do I also need to connect the DVD drive and hard drive? There are four ways to dump your NAND. The LPT method, the USB-SPI method (there are a few devices that are of this type but for this tutorial I be covering Team Xecuters NAND-X and J-R Programmer as they are the best out there), the NAND R/W kit for 4GB Coronas only, and the DemoN for those who are installing it. If you are doing a dual NAND setup and installing the DemoN it has its own way to read/write to the NAND so you will be using that, and if you have a Corona V2/V4 you HAVE to use the Corona R/W KIT (SD Card Method). So if you don't have a Corona V2/V4, and aren't using a DemoN, here is the comparison. Keep in mind that every console is different and you might not be getting the results from above, if that is the case you can play around with the wires and try the static timing files, or live with the slower boot times. You can use the timing assistant in the bottom left to auto select a safe timing for your motherboard revision.

Once you've finished soldering, clean up any flux with isopropyl alcohol and cotton swabs. Partially re-assemble your Xbox 360, ensuring that: If you are using the RGH method move the "SLIM/PHAT" switch to whichever console you have, and move the "PRG/NOR" switch to "NOR" If you are using an xFlasher, ensure the switch is set to eMMC (for 4GB Corona) or SPI (for all other motherboards). Plug a flash drive into your Xbox 360 and navigate to Console Settings > Storage. Select the flash drive and allow it to format the flash drive as a system drive. I'm currently following JoinTheResistance's guide (account is to new to make a direct link to it) to install the RGH 1.2 mod on my Jasper Xbox 360. I have a J-R Programmer and a Coolrunner Rev C glitch chip.Plug the flash drive into your PC. Create a new folder on the flash drive and name it 0000000000000000 (16 zeroes). Open the new folder, then drag the CODE9999 folder into it.

Thanks, for reading! I hope this tutorial helped you in some way. This is probably the longest tutorial I have ever written so please let me know what you think about it, and if you think that I have missed something or that something needs more clarification. In this tutorial I am going to show you how to do a rgh1.2 install on phat console using a matrix glitcher, x360 ace, TX coolrunner, cr3 lite and a squirt chip. First of all let's start with what rgh1.2 is and what you will be needing.

There is a POST QSB for Trinitys (a 2nd QSB that goes on the bottom) but it doesn't really make a big difference so I will not talk about it You may be done all of the hardware changes, but not the software. This part will get you started with using your Xbox's new capabilities. When you turn it on you'll have to go through the setup crap. Select Drive > Close, then close Xplorer360. Safely eject your flash drive and plug it into your Xbox 360. Navigate to the Demos section of your dashboard, and it should list XeXMenu there. Select it to launch it.